Search by Brand
.jpg "Superior Radiant Gas Fired Infrared Tube Heaters and High Intensity Heaters")        |
Enerco High Intensity Infrared Heaters |
 |
Enerco heaters are extremely cost-effective in large buildings and where high bay construction makes forced warm air heating annoyingly drafty and prohibitively expensive. Excellent spot heaters, zone heaters or as a total heating system. Some popular applications include:
Auto Service Garages
Warehouses
Factories
Refineries
Loading Docks
Covered Golf Driving Ranges
Manufacturing Plants
Dry-off areas
Freeze Control
Assembly areas
Entryways
Pump Houses
and many more
High intensity heaters are easy to install. Simply suspend with chain from the ceiling, being sure to meet all clearance to combustible requirements and mounting height recommendations, and connect to thermostat. No flue is required. Ventilation of the building may be necessary when used as a total heating system in order to dissipate products of combustion (mainly water vapor).
Unlike other brands, Enerco heaters can be postioned horizontal (pointing straight down) up to a 45 degree angle, making them among the most versatile high intensity heaters on the market. |
Enerco Heater Specifications:
Clearance to Combustibles Reflector Dimensions
Model No. BTU/HR. Top Sides Back Below (Inches) L-W-H
4040 40,000 34" 30" 30" 68" 27-1/2 x 15 x 6-3/8
8060 60,000 40" 30" 30" 84" 42-1/4 x 15 x 6-3/8
9100S 100,000 48" 46" 46" 118" 55-1/2 x 15 x 6-3/8
9140 140,000 46" 46" 46" 114" 82-1/2 x 15 x 6-3/8
Control Systems for above models:
NDSP-5 - Natural Gas Automatic Spark Pilot with Safety Burner Shutoff, 24V, AC Control with Intermittant Pilot (Pilot is off when heater is off). Transformer (120/25V) is shipped loose with each heater.
LA-5 - Propane Gas Automotic Spark Pilot with Safety Burner Shutoff on Pilot and Burner, 24V. AC Control with intermittent pilot (Pilot is off when heater is off). Transformer (120/25V) is shipped loose with each heater.
PP - Natural or Propane Gas - Power Pile (self-energizing) control. No outside electrical source required to turn heater on and off. Manually lit pilot. Safety Shutoff on Pilot and Burner. Power Pile Thermostat shipped loose with each heater.
NOTE: Heaters come with extra orfices for converting the BTU rate as follows:
Model 4040 - can be field converted down to 30,000 BTU's.
Model 8060 - can be field converted down to 50,000 or up to 70,000 BTU's
Model 9100S - can be field converted down to 90,000 or 80,000 BTU's
Model 9140 - can be field converted down to 120,000 or 100,000 BTU's
Click here for Enerco residential garage/shop heaters
|
|
|
| Superior High Intensity Infra-Red Heaters |
.jpg "Enerco High Intensity Heaters") |
Superior Radiant (Sun Classic) gas-fired high intensity infrared heaters are excellent for heating large open bay facilities where forced air heaters are impractical and expensive to operate. These heaters are 99.9% efficient, because they are vent free, and are ideal for either spot heating or for a total building heating system. Popular heating applications include: Auto service garages, aircraft hangars, factories, entryways, pump houses, refineries, shops, over assembly lines, loading dock areas, freeze control and many more. Superior Radiant high intensity heaters are easy to install. Simply suspend with chain from the ceiling and be sure to meet all clearance to combustible requirements and installation guidelines and connect to thermostat, timer or on/off control. Since these heaters are vent free, ventilation of the building space may be necessary to eliminate excess humidity. |
|
| Sun Classic Heater Specifications: Model No. BTU/HR. Clearance to Combustibles Reflector Dim.
NAT. LPG Top Sides Back Below (inches) L-W-D SD03N 33,000 - 35" 28" 20" 70" 16.3 x 24.4 x 9.2
SD03P - 30,000 35" 28" 20" 70" 16.3 x 24.4 x 9.2
SD06N 66,000 - 40" 35" 20" 80" 23.1 x 24.4 x 9.2
SD06P - 60,000 40" 35" 20" 80" 23.1 x 24.2 x 9.2
SD09N 99,000 - 50" 42" 28" 100" 30.0 x 24.4 x 9.2
SD09P - 90,000 50" 42" 28" 100" 30.0 x 24.4 x 9.2
SD12N 132,000 - 54" 46" 28" 110" 36.9 x 24.4 x 9.2
SD12P - 120,000 54" 46" 28" 110" 36.9 x 24.4 x 9.2
SD16N 160,000 - 60" 48" 34" 134" 36.9 x 24.4 x 9.2
Suggested Minimum Mounting Heights (feet)
Heater Input Rate Mounting Angle
BTU/H 10 Deg. 35 Deg.
30,000-33,000 11 - 13 10 - 12
60,000-66,000 14.5 - 16.5 13 - 15
90,000-99,000 16 - 18.5 14.5 - 17
120,000-132,000 17.5 - 21 15.5 - 18.5
160,000 19 - 23 17 - 21
Control Options: Direct Spark Igntion - Requires electrical power.
Millivolt Ignition - Has constant pilot. No electricity. |
| Search by Category
|
